Car Paint Spray TESLA Model S, 3, X, Y

TESLA Car Paint Spray



TESLA MOTORS paint spray can of 150Ml.

Hide your scratches with a spray for a Professional finish.

Solvent paint



Properties of the Paint Spray Can



Original color of the manufacturer Quick drying Excellent covering and filling power Long-lasting shade and shine Shock and scratch resistant Resistant to atmospheric conditions Excellent anticorrosion Unalterable and resistant to UV rays Excellent adhesion.



Innovative spray technology and nozzle guaranteed thanks to the wide mist jet, high yield, and constant pressure for optimal application and professional final quality.


 
Physical and Chemical Characteristics

• 
  
  
• Volume: 142.5 ml in Spray
  
  
• Yield: depending on the condition and color of the substrate, 400 ml covers approx. 1.25 to 1.75 m²
  
  
• Base: acrylic resin
  
  
• VOC: about 88% w/w V(olatile) O(rganic) C(omponents) Extract
  
  
• Dry dust-free: after 5 to 10 minutes
  
  
• Dry to touch: after 10 to 20 minutes
  
  
• Dry to the core / repaint: after 2 hours
  
  
• Heat resistance: up to 110°C
  
  

Pre-treatment The surface must be clean, dry and degreased. Remove old paint residues, then sand and apply a primer layer with a MoTip primer suitable for the substrate. After drying, lightly sand (grain P2000) the primer layer.



Painting your Car :  The surface of your Auto Body must be clean, dry and degreased. Bring the aerosol can to room temperature. The ideal application temperature is between 15 to 25°C. Before application, shake the can well for at least 2 minutes and paint a sample. The spraying distance from the object to be painted is between 25 and 30 cm.



Apply the Auto paint in several thin layers. Before applying the next layer, shake the can well again. An optimal result is obtained by applying a layer of MoTip transparent acrylic varnish.



After use, purge the valve by spraying the car paint can upside down (about 5 seconds).



The drying time depends on the temperature and atmospheric humidity as well as the thickness of the applied layer.