TESLA Roadster Car Paint Spray

TESLA Car Paint Spray



TESLA MOTORS 150ml paint spray.

Hide your scratches with one spray for a Professional finish.

Solvent-based paint



Properties of the Paint Spray



 



Original manufacturer color Quick drying Excellent covering and filling power Long-lasting color and shine Resistant to shocks and scratches Resistant to weather conditions Excellent anti-corrosion Unalterable and UV resistant Excellent adhesion.



Innovative spraying technology and nozzle are guaranteed thanks to the wide misty jet, high yield, and constant pressure for optimal application and professional final quality.



Physical and Chemical Characteristics

• 
  
  
• Volume: 142.5 ml in Spray
  
  
• Yield: depending on the condition and color of the substrate, 400 ml covers approx. 1.25 to 1.75 m²
  
  
• Base: acrylic resin
  
  
• VOC: about 88% w/w V(olatile) O(rganic) C(omponents) Extract
  
  
• Dust-dry: after 5 to 10 minutes
  
  
• Touch-dry: after 10 to 20 minutes
  
  
• Thorough-dry / ready to repaint: after 2 hours
  
  
• Heat resistance: up to 110°C
  
  

Pre-treatment The surface must be clean, dry and degreased. Remove old paint residues, then sand and apply a primer layer with a MoTip primer suitable for the substrate. After drying, lightly sand (grain P2000) the primer layer.



Painting your Car :  The surface of your Auto Body must be clean, dry and degreased. Bring the aerosol to room temperature. The ideal application temperature is between 15 and 25°C. Before application, shake the aerosol well for at least 2 minutes and paint a sample. The spraying distance from the object to be painted is between 25 and 30 cm.



Apply the Auto paint in several thin layers. Before applying the next layer, shake the aerosol well again. Optimal result is achieved by applying a layer of clear MoTip acrylic varnish.



After use, purge the valve by spraying the Car spray upside down (for about 5 seconds).



Drying time depends on temperature and atmospheric humidity as well as the thickness of the applied layer.